LISUN glow wire tester is designed according to IEC and UL

The International Electrotechnical Commission (IEC) and Underwriters Laboratories both contributed to the development of the specifications that were used in the construction of the LISUN glow wire tester (UL). These organizations formulate and continue to update safety standards for the electrical and electronic equipment they manufacture, and the LISUN glow wire tester is developed to conform to these guidelines.

The IEC and UL standards both specify the test conditions and procedures that must be followed in order to accurately evaluate the potential for an electrical or electronic device to start a fire. These conditions and procedures include the temperature and duration of the glow wire, as well as the preparation of the test specimen and the analysis of the results. The LISUN glow wire tester was developed to fulfill these parameters, and as a consequence, it delivers results that are accurate and reliable. Furthermore, these results are equivalent to those achieved by other testers that used the same standards.

The International Electrotechnical Commission (IEC) and the Underwriters Laboratories (UL) both have standards that specify safety guidelines for the design and installation of electrical and electronic devices. The LISUN glow wire tester was developed with safety in mind, and it has safety-oriented features such as an alert and an automatic shut-off function to guarantee that the testing operation is carried out in a safe and sound manner.

In conclusion, the LISUN glow wire tester is built to provide accurate and consistent results while also protecting the safety of the user. These standards were created by the IEC and UL. Manufacturers and testing facilities may have confidence that the findings of the Glow Wire Test are accurate and similar to other results obtained using the same standards if they adhere to these criteria and follow them to the letter. This contributes to ensuring that the items being tested are both safe and secure, as well as that the standards for electrical and electronic equipment are continually maintained and improved upon.

Comments

Post a Comment

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?

Image
The flammability of different materials, such as plastics and other materials used in items such as automobile interiors, electronic devices, and electrical appliances, is evaluated using a number of different standards. Some of these standards are FMVSS 302, UL 94, and IEC 60695. Nevertheless, there are a number of important distinctions between these standards: FMVSS 302 is a specialized standard that was designed for the automotive industry to analyze the flammability of materials used in car interiors. Its purpose is to measure the combustibility of these materials. The UL 94 standard is a more comprehensive regulation that assesses the combustibility of a variety of materials, including plastics, and has applications in a number of different sectors. IEC 60695 is a global standard that is used in the process of assessing the potential for electronic and electrical equipment to catch fire. Testing Procedures The flammability of materials is determined using a variety of testing ...
Read more
Image
125 Grounding Contact Test 125.1 Grounding receptacles having a 5-15R,5-20R，6-13R，6-20R，7-15R，14-15Ror 15-15R configuration are to be subjected to the tests in this section. 125.2 Previously untested devices are to be used. Each device is to be mounted in a flush device box, or as otherwise intended, with its face in a vertical plane. A nonmetallic faceplate is to be installed if intended. A solid 14 AWG (2.1 mm2) copper conductor is to be connected to the receptacle grounding terminal. GNGPL SB1610_AL 125.3 With the receptacle oriented to create the maximum contact displacement (possible distortion of contact affecting its contact ability), the test pin A. Figure 125.1 is to be fully inserted in the grounding contact. A 5 lb (2.27 kg) weight is to be gradually suspended form the test pin 6 inches (152 mm) from the face of the receptacle. The weight is to be applied for 1 minute, following which, the weight is to be removed. The application of the weight is to be repeated with the rece...
Read more
Image
Accessible parts of equipment with standard IEC 62368 General An accessible part of an equipment is a part that can be touched by a body part. For the purposes of dctermining an accessible part, a body part is represented by one or more of the specified test probes. Accessible parts of an equipment can include parts behind a door, panel, removable cover, etc. that can be opened without the use of a tool. Accessible parts do not include those that become accessible when floor standing equipment having a mass exceeding 40 kg is tilted. For equipment intended for building-in or rack-mounting, or for subassemblies and the like for incorporation in larger equipment,accessible parts do not include those that are not accessible when the equipment or subassembly is installed according to the method of mounting or installation specified in the installation instructions. A part is considered accessible if the instructions or markings intended to be followed require that a person phys...
Read more