How to use LISUN environmental test chamber?

The following procedures need to be carried out in order to make use of a LISUN environmental test chamber:

  • During the preparation phase, be certain that the specimen to be tested is clean and free of any contaminants that can affect the findings of the test.
  • Installing the test specimen in the chamber and adjusting the temperature and humidity settings so that they correspond to the intended test conditions are the first steps in setting up the test chamber.
  • Start the test by first turning on the power to the chamber, and then beginning the test by pushing the button on the control panel that corresponds to its purpose.
  • Observe the test specimen via the viewing glass or use an external monitoring device, such as a thermometer or hygrometer, to monitor the temperature and humidity conditions within the testing chamber. This will help ensure that the test is conducted correctly.
  • Results should be recorded by noting the temperature and humidity measurements taken at regular intervals during the test, as well as noting any changes that may have occurred in the test specimen's appearance or functioning.
  • Stopping the test involves turning off the power supply to the chamber and removing the test specimen after it has been determined that the test has been successfully completed.
  • Analyzing the findings: Analyze the outcomes of the test, including any changes that may have occurred in the temperature and humidity levels, as well as the influence that these alterations had on the test specimen.

When using a LISUN environmental test chamber, it is essential to follow the directions and recommendations provided by the manufacturer. Failing to do so may lead to erroneous test results as well as harm to the chamber itself as well as the object being tested.

Comments

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?