Environmental Chamber | Climatic Chamber | Thermal Chamber | Salt Fog Chamber - LISUN

The following procedures need to be carried out in order to test LED outdoor goods using a chamber with a constant temperature and humidity : Make sure the chamber is ready: Before commencing the test, make sure the temperature and humidity levels are at the levels you want them to be and give the chamber some time to settle down. Install the LED product: When installing the LED product in the chamber, make sure that it is fastened firmly and that all of the necessary electrical connections have been established. Establish a connection with the testing apparatus: Establish a connection between the testing apparatus, such as a spectroradiometer or a photometer, and the LED product Carry out the test: To get started with the test, measure the light output and color accuracy of the LED product at a variety of various temperatures and degrees of humidity. To guarantee the accuracy and reliability of the data, you should carry out several measurements at a variety of time intervals. Anal

In order to put a temperature and humidity test chamber for electronic components to use, the following steps are required to be taken: Prepare the testing equipment as follows: After giving the enclosure a good washing and making sure it is completely dry, check to make sure that the controls for the temperature and humidity have been correctly calibrated. Arrangement of the electrical components inside the chamber should look like this: Verify that the components have been placed securely and that there is sufficient space between them to avoid any interference from occurring as a result of one another. Initiate the test by stating that when the chamber has been switched on, the temperature and humidity levels should be adjusted according to your requirements. It is essential to provide the components permission to be exposed to these conditions for a certain amount of time. Maintain a keen focus on the examination: Ensure that you remain vigilant over the measurements to guarant