Temperature humidity environmental chamber test against electronic products according to IEC60068

IEC 60068 is an international standard that details the procedures that must be followed when conducting tests on electronic and electrical devices in a wide range of different environmental conditions. The International Electrotechnical Commission is responsible for the development of this standard (IEC). Temperature and humidity testing, which is one of the most significant tests needed by the standard, is carried out in a specialized chamber that maintains a constant temperature and humidity level throughout the testing process.

The functionality and dependability of electronic products are going to be put to the test in this evaluation, in which they will be exposed to a wide range of severe climatic conditions, such as extremes of temperature (both high and low) and high levels of humidity. These conditions will be put to the test in order to determine how well the electronic products can withstand them. This makes it simpler for manufacturers and suppliers to identify potential problems that may occur in applications in the real world, such as the malfunction of components, the corrosion of materials, or a reduction in the quality of the material.

During the course of the assessment, the product will be subjected to environmental conditions whose temperature and humidity levels will be accurately regulated. Temperature cycling, humidity testing, temperature shock, and assessments that mix temperature and humidity are examples of the circumstances that may be present here. After the evaluation has been finished, the results are analyzed in order to determine how effectively the product functioned in the conditions that were simulated and to identify any potential flaws in the system that might have caused the failure.

IEC 60068 outlines a technique for assessing an electronic product's ability to endure environmental stress by subjecting it to varying degrees of temperature and humidity. This procedure offers an all-encompassing examination of the product's capacity to withstand such conditions. This assessment also helps to guarantee that the product meets with industry standards for dependability and performance. These criteria are determined by the industry as a whole.

Comments

Post a Comment

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?

Image
The flammability of different materials, such as plastics and other materials used in items such as automobile interiors, electronic devices, and electrical appliances, is evaluated using a number of different standards. Some of these standards are FMVSS 302, UL 94, and IEC 60695. Nevertheless, there are a number of important distinctions between these standards: FMVSS 302 is a specialized standard that was designed for the automotive industry to analyze the flammability of materials used in car interiors. Its purpose is to measure the combustibility of these materials. The UL 94 standard is a more comprehensive regulation that assesses the combustibility of a variety of materials, including plastics, and has applications in a number of different sectors. IEC 60695 is a global standard that is used in the process of assessing the potential for electronic and electrical equipment to catch fire. Testing Procedures The flammability of materials is determined using a variety of testing ...
Read more
Image
125 Grounding Contact Test 125.1 Grounding receptacles having a 5-15R,5-20R，6-13R，6-20R，7-15R，14-15Ror 15-15R configuration are to be subjected to the tests in this section. 125.2 Previously untested devices are to be used. Each device is to be mounted in a flush device box, or as otherwise intended, with its face in a vertical plane. A nonmetallic faceplate is to be installed if intended. A solid 14 AWG (2.1 mm2) copper conductor is to be connected to the receptacle grounding terminal. GNGPL SB1610_AL 125.3 With the receptacle oriented to create the maximum contact displacement (possible distortion of contact affecting its contact ability), the test pin A. Figure 125.1 is to be fully inserted in the grounding contact. A 5 lb (2.27 kg) weight is to be gradually suspended form the test pin 6 inches (152 mm) from the face of the receptacle. The weight is to be applied for 1 minute, following which, the weight is to be removed. The application of the weight is to be repeated with the rece...
Read more
Image
Accessible parts of equipment with standard IEC 62368 General An accessible part of an equipment is a part that can be touched by a body part. For the purposes of dctermining an accessible part, a body part is represented by one or more of the specified test probes. Accessible parts of an equipment can include parts behind a door, panel, removable cover, etc. that can be opened without the use of a tool. Accessible parts do not include those that become accessible when floor standing equipment having a mass exceeding 40 kg is tilted. For equipment intended for building-in or rack-mounting, or for subassemblies and the like for incorporation in larger equipment,accessible parts do not include those that are not accessible when the equipment or subassembly is installed according to the method of mounting or installation specified in the installation instructions. A part is considered accessible if the instructions or markings intended to be followed require that a person phys...
Read more