How many kinds of flame tests are there according to IEC standards?

According to the regulations established by the International Electrotechnical Commission (IEC), there are a few different kinds of flame tests that may be performed on lights. The following are examples of some of the flame tests for lights that are most often used:

  • This standard addresses the horizontal and vertical flammability tests for completed items, such as lighting products. IEC 60695-11-10 is the number for this standard.
  • This standard addresses the flammability test for light sources, such as LED modules and lamps, and is designated as IEC 60695-11-20.
  • This standard addresses the flammability test for LED luminaires and LED retrofit bulbs, and its designation is IEC 60695-11-30.
  • This standard addresses the flammability test for material samples, including those used in the production of lighting products. It is designated as IEC 60695-2-10.
  • This standard addresses the flammability test for the surface spread of flame of materials and products, and its designation is IEC 60695-2-13.

These instructions not only give direction for assessing the outcomes of the tests, but also detail the procedures, equipment, and circumstances that should be utilized for carrying out the tests. The particular kind of flame test that is carried out on a lighting product is going to be determined by the kind of product, how it is going to be used, the appropriate safety requirements and laws, and so on.

According to the IEC standards, there are a number of different kinds of flame tests that may be performed on lights. These include testing on completed goods, light sources, LED luminaires and retrofit lamps, material samples, and the surface spread of flame of materials and products. The particular kind of flame test that is performed on a lighting product is going to be determined by the product's category, its intended use, the necessary safety standards and laws, and so on. 

Comments

Post a Comment

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?

Image
The flammability of different materials, such as plastics and other materials used in items such as automobile interiors, electronic devices, and electrical appliances, is evaluated using a number of different standards. Some of these standards are FMVSS 302, UL 94, and IEC 60695. Nevertheless, there are a number of important distinctions between these standards: FMVSS 302 is a specialized standard that was designed for the automotive industry to analyze the flammability of materials used in car interiors. Its purpose is to measure the combustibility of these materials. The UL 94 standard is a more comprehensive regulation that assesses the combustibility of a variety of materials, including plastics, and has applications in a number of different sectors. IEC 60695 is a global standard that is used in the process of assessing the potential for electronic and electrical equipment to catch fire. Testing Procedures The flammability of materials is determined using a variety of testing ...
Read more
Image
125 Grounding Contact Test 125.1 Grounding receptacles having a 5-15R,5-20R，6-13R，6-20R，7-15R，14-15Ror 15-15R configuration are to be subjected to the tests in this section. 125.2 Previously untested devices are to be used. Each device is to be mounted in a flush device box, or as otherwise intended, with its face in a vertical plane. A nonmetallic faceplate is to be installed if intended. A solid 14 AWG (2.1 mm2) copper conductor is to be connected to the receptacle grounding terminal. GNGPL SB1610_AL 125.3 With the receptacle oriented to create the maximum contact displacement (possible distortion of contact affecting its contact ability), the test pin A. Figure 125.1 is to be fully inserted in the grounding contact. A 5 lb (2.27 kg) weight is to be gradually suspended form the test pin 6 inches (152 mm) from the face of the receptacle. The weight is to be applied for 1 minute, following which, the weight is to be removed. The application of the weight is to be repeated with the rece...
Read more
Image
Accessible parts of equipment with standard IEC 62368 General An accessible part of an equipment is a part that can be touched by a body part. For the purposes of dctermining an accessible part, a body part is represented by one or more of the specified test probes. Accessible parts of an equipment can include parts behind a door, panel, removable cover, etc. that can be opened without the use of a tool. Accessible parts do not include those that become accessible when floor standing equipment having a mass exceeding 40 kg is tilted. For equipment intended for building-in or rack-mounting, or for subassemblies and the like for incorporation in larger equipment,accessible parts do not include those that are not accessible when the equipment or subassembly is installed according to the method of mounting or installation specified in the installation instructions. A part is considered accessible if the instructions or markings intended to be followed require that a person phys...
Read more