Exploring the Effects of EFT Immunity Measurement and Testing on Human Health
I. Introduction

EFT Immunity Measurement is an interference simulation generator for electronic products and is an instrument for the quick transient burst pulse anti-interference test, as well as a kind of electromagnetic compatibility anti-interference test instrument, which is used to testthe resistance of electronic and electrical systems to quick transient interference. This quick transient burst pulse group generator includes power supply system, keyboard unit, display unit, main control unit, high voltage power supply, energy storage capacitor, main capacitor, frequency generating circuit, main switch, waveform circuit and coupling-decoupling circuit. The main control unit controls the high voltage power supply to charge the energy storage capacitor and the energy storage capacitor charges the main capacitor through the charging circuit.

The main control unit generates the corresponding control signal according to the preset frequency to control the opening and closing of the main switch. When the main switch is opened, the main capacitor is discharged through the waveform circuit to form the fast transient/burst interference waveform, and the main control unit controls the coupling-decouplingcircuit to couple the interference to the equipment under test (ETU) power supply according to the set channel, or It outputs the interference waveform according to the source output mode. This coupling-decoupling circuit adopts a digital control system, which is easy to operate, has good human-computer interface, shortest coupling path and good waveform consistency. When the main switch is off, the energy storage capacitor is charged to the main capacitor. The frequency generating circuit is used to generate PWM signals to control the main switch. When the switch is switched at different frequencies under the control of different frequency PWM (Pulse Width Modulation) signals generated by the main control unit frequency generating circuit, different frequency quick transient waveforms are generated. Parameters of this generator are input by the keyboard unit and parameter display is completed by the display unit. The power supply system adopts 220V, 50HZ AC power and converts multiple DC power supplies for the generator through the power interface and switch power supply.

II. Features

A EFT Immunity Measurement, characterized in that it comprises a power supply system, a keyboard unit, a display unit, a main control unit, a high voltage power supply, an energy storage capacitor, a main capacitor, a frequency generating circuit, a main switch, a waveform circuit and a coupling-decoupling circuit, wherein the main control unit controls the high voltage power supply to reach the set voltage and charges the energy storage capacitor, the energy storage capacitor charges the main capacitor through the charging circuit, and the main control unit generates the corresponding control signal according to the preset frequency to control the opening and closing of the main switch When the main switch is opened, the main capacitor forms an interference waveform through the waveform circuit, when the main switch is turned off, the energy storage capacitor is charged to the main capacitor, the frequency generating circuit is used to generate the PWM signal to control the main switch, and When the switch is switched under the control of different frequency PWM signals generated by the main control unitfrequency generating different frequency quick transient waveforms are generated.

III. Purpose of EFT Test

The purpose of the quick transient burst pulse EFT test is to verify the anti-interference ability of mechanical switches caused by inductive load switching, relay contact bouncing, high voltage switch switching and other instantaneous disturbances. This test method is a pulse group test composed of many quick transient pulses coupled to

the power line, control line and signal line. Easy problems occur in power equipment or monitoring power grid equipment, equipment used in industrial automation, medical monitoring and other detection of weak signal equipment.

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator Guns, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.

Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381

Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997
https://www.lisungroup.com/news/technology-news/exploring-the-effects-of-eft-immunity-measurement-and-testing-on-human-health.html

Comments

Post a Comment

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?

Image
The flammability of different materials, such as plastics and other materials used in items such as automobile interiors, electronic devices, and electrical appliances, is evaluated using a number of different standards. Some of these standards are FMVSS 302, UL 94, and IEC 60695. Nevertheless, there are a number of important distinctions between these standards: FMVSS 302 is a specialized standard that was designed for the automotive industry to analyze the flammability of materials used in car interiors. Its purpose is to measure the combustibility of these materials. The UL 94 standard is a more comprehensive regulation that assesses the combustibility of a variety of materials, including plastics, and has applications in a number of different sectors. IEC 60695 is a global standard that is used in the process of assessing the potential for electronic and electrical equipment to catch fire. Testing Procedures The flammability of materials is determined using a variety of testing ...
Read more
Image
125 Grounding Contact Test 125.1 Grounding receptacles having a 5-15R,5-20R，6-13R，6-20R，7-15R，14-15Ror 15-15R configuration are to be subjected to the tests in this section. 125.2 Previously untested devices are to be used. Each device is to be mounted in a flush device box, or as otherwise intended, with its face in a vertical plane. A nonmetallic faceplate is to be installed if intended. A solid 14 AWG (2.1 mm2) copper conductor is to be connected to the receptacle grounding terminal. GNGPL SB1610_AL 125.3 With the receptacle oriented to create the maximum contact displacement (possible distortion of contact affecting its contact ability), the test pin A. Figure 125.1 is to be fully inserted in the grounding contact. A 5 lb (2.27 kg) weight is to be gradually suspended form the test pin 6 inches (152 mm) from the face of the receptacle. The weight is to be applied for 1 minute, following which, the weight is to be removed. The application of the weight is to be repeated with the rece...
Read more
Image
Accessible parts of equipment with standard IEC 62368 General An accessible part of an equipment is a part that can be touched by a body part. For the purposes of dctermining an accessible part, a body part is represented by one or more of the specified test probes. Accessible parts of an equipment can include parts behind a door, panel, removable cover, etc. that can be opened without the use of a tool. Accessible parts do not include those that become accessible when floor standing equipment having a mass exceeding 40 kg is tilted. For equipment intended for building-in or rack-mounting, or for subassemblies and the like for incorporation in larger equipment,accessible parts do not include those that are not accessible when the equipment or subassembly is installed according to the method of mounting or installation specified in the installation instructions. A part is considered accessible if the instructions or markings intended to be followed require that a person phys...
Read more