Dust Test Chamber and Sand and Dust Test Equipment for Quality Testing



https://www.lisungroup.com/news/technology-news/dust-test-chamber-and-sand-and-dust-test-equipment-for-quality-testing.html

Comments

Post a Comment

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?

Image
The flammability of different materials, such as plastics and other materials used in items such as automobile interiors, electronic devices, and electrical appliances, is evaluated using a number of different standards. Some of these standards are FMVSS 302, UL 94, and IEC 60695. Nevertheless, there are a number of important distinctions between these standards: FMVSS 302 is a specialized standard that was designed for the automotive industry to analyze the flammability of materials used in car interiors. Its purpose is to measure the combustibility of these materials. The UL 94 standard is a more comprehensive regulation that assesses the combustibility of a variety of materials, including plastics, and has applications in a number of different sectors. IEC 60695 is a global standard that is used in the process of assessing the potential for electronic and electrical equipment to catch fire. Testing Procedures The flammability of materials is determined using a variety of testing ...
Read more

Temperature humidity environmental chamber test against electronic products according to IEC60068

Image
IEC 60068 is an international standard that details the procedures that must be followed when conducting tests on electronic and electrical devices in a wide range of different environmental conditions. The International Electrotechnical Commission is responsible for the development of this standard (IEC). Temperature and humidity testing , which is one of the most significant tests needed by the standard, is carried out in a specialized chamber that maintains a constant temperature and humidity level throughout the testing process. The functionality and dependability of electronic products are going to be put to the test in this evaluation, in which they will be exposed to a wide range of severe climatic conditions, such as extremes of temperature (both high and low) and high levels of humidity. These conditions will be put to the test in order to determine how well the electronic products can withstand them. This makes it simpler for manufacturers and suppliers to identify potentia...
Read more

How to use LISUN environmental test chamber?

Image
The following procedures need to be carried out in order to make use of a LISUN environmental test chamber: During the preparation phase, be certain that the specimen to be tested is clean and free of any contaminants that can affect the findings of the test. Installing the test specimen in the chamber and adjusting the temperature and humidity settings so that they correspond to the intended test conditions are the first steps in setting up the test chamber. Start the test by first turning on the power to the chamber, and then beginning the test by pushing the button on the control panel that corresponds to its purpose. Observe the test specimen via the viewing glass or use an external monitoring device, such as a thermometer or hygrometer, to monitor the temperature and humidity conditions within the testing chamber. This will help ensure that the test is conducted correctly. Results should be recorded by noting the temperature and humidity measurements taken at regular intervals ...
Read more