How to operate LISUN salt spray test chamber?

In order to get precise and trustworthy findings from a LISUN salt spray test chamber, its operation requires the completion of a series of stages. When using a LISUN salt spray test chamber, the following procedures should be adhered to in general:

  1. Before beginning the test, you need to make sure that the testing chamber is spotless, devoid of any debris or contamination, and ready for use. Make sure that the test specimens or samples are clean, dry, and free of any surface contamination before you begin preparing them.
  2. To prepare the chamber, first ensure that it is switched on, then adjust the settings for the temperature, humidity, and salt spray so that they correspond to the appropriate conditions for the test. In most cases, LISUN salt spray test chambers are furnished with a control system that enables quick and simple configuration and modification of the various aspects of the test environment.
  3. While the samples are being loaded: After loading the test specimens or samples into the chamber, check to see that they are properly positioned so that they won't move or shift while the test is being performed.
  4. Monitoring the test: While the test is being performed, it is important to monitor the test specimens or samples on a frequent basis in order to verify that the test conditions are being preserved and that the specimens are not being destroyed or deteriorated in any way. Depending on the particular needs of the test, this may be accomplished by eye examination, the use of measuring devices, or any number of other monitoring approaches.
  5. Performing the last step of the test involves removing the test specimens or samples from the chamber after the allotted amount of time for the test has expired and analyzing their current state. This may be accomplished by visual examination, the measurement of performance or physical attributes, or through any number of other approaches, depending on what kind of test is being carried out.
  6. Cleaning the chamber: When the experiment is over, you will need to carefully clean the chamber to get rid of any salt residue as well as any other impurities. This will assist to guarantee reliable findings for any future tests and will also allow the chamber to last for a much longer period of time.

Note that the particular actions and processes involved in running a LISUN salt spray test chamber may change based on the type and configuration of the chamber that is being used. In order to properly operate the chamber and complete salt spray tests, it is essential to adhere to the instructions and recommendations provided by the manufacturer.

Comments

Post a Comment

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?

Image
The flammability of different materials, such as plastics and other materials used in items such as automobile interiors, electronic devices, and electrical appliances, is evaluated using a number of different standards. Some of these standards are FMVSS 302, UL 94, and IEC 60695. Nevertheless, there are a number of important distinctions between these standards: FMVSS 302 is a specialized standard that was designed for the automotive industry to analyze the flammability of materials used in car interiors. Its purpose is to measure the combustibility of these materials. The UL 94 standard is a more comprehensive regulation that assesses the combustibility of a variety of materials, including plastics, and has applications in a number of different sectors. IEC 60695 is a global standard that is used in the process of assessing the potential for electronic and electrical equipment to catch fire. Testing Procedures The flammability of materials is determined using a variety of testing ...
Read more
Image
125 Grounding Contact Test 125.1 Grounding receptacles having a 5-15R,5-20R，6-13R，6-20R，7-15R，14-15Ror 15-15R configuration are to be subjected to the tests in this section. 125.2 Previously untested devices are to be used. Each device is to be mounted in a flush device box, or as otherwise intended, with its face in a vertical plane. A nonmetallic faceplate is to be installed if intended. A solid 14 AWG (2.1 mm2) copper conductor is to be connected to the receptacle grounding terminal. GNGPL SB1610_AL 125.3 With the receptacle oriented to create the maximum contact displacement (possible distortion of contact affecting its contact ability), the test pin A. Figure 125.1 is to be fully inserted in the grounding contact. A 5 lb (2.27 kg) weight is to be gradually suspended form the test pin 6 inches (152 mm) from the face of the receptacle. The weight is to be applied for 1 minute, following which, the weight is to be removed. The application of the weight is to be repeated with the rece...
Read more
Image
Accessible parts of equipment with standard IEC 62368 General An accessible part of an equipment is a part that can be touched by a body part. For the purposes of dctermining an accessible part, a body part is represented by one or more of the specified test probes. Accessible parts of an equipment can include parts behind a door, panel, removable cover, etc. that can be opened without the use of a tool. Accessible parts do not include those that become accessible when floor standing equipment having a mass exceeding 40 kg is tilted. For equipment intended for building-in or rack-mounting, or for subassemblies and the like for incorporation in larger equipment,accessible parts do not include those that are not accessible when the equipment or subassembly is installed according to the method of mounting or installation specified in the installation instructions. A part is considered accessible if the instructions or markings intended to be followed require that a person phys...
Read more