What are the differences between IPX1 and IPX2 waterproof level tests?

The International Electrotechnical Commission (IEC) developed the IPX1 and IPX2 waterproof level tests in order to determine how well electronic and electrical equipment are protected against the introduction of water. Depending on the results of these tests, an object may be determined to be waterproof or not waterproof.

The key feature that distinguishes the IPX1 and IPX2 waterproof level testing from one another is the intensity and duration of the water seeping and dripping that is performed during the tests.

The IPX1 waterproof test entails the product being subjected to a steady stream of water being poured over it for a duration of 10 minutes. The IPX1 test is meant to ensure that a product can withstand a certain amount of water dropping onto it without allowing any of that water to penetrate the device's inner workings. The IPX1 test is designed to ensure that a product can pass this test. This is the most important thing that you need to get out of the exam.

The IPX2 waterproof test, on the other hand, involves a more intense and protracted dripping of water. It is essential that the product be able to withstand water being showered over it at an angle of fifteen degrees for a duration of ten minutes. The IPX2 test is intended to ensure that the product can survive water pouring at a certain angle and for a longer amount of time than the IPX1 test. The IPX2 test was developed to guarantee that the product can withstand water pouring. There is another name for this test, which is the "ingress protection level 2" test.

The IPX1 waterproof test is designed to evaluate the level of protection against water dripping, whereas the IPX2 waterproof test is designed to evaluate the level of protection against water dripping from a specific angle for a longer period of time. Both of these tests are designed to determine whether or not an item can withstand water for an extended period of time. In conclusion, the purpose of the IPX1 water resistance test is to determine the degree of protection offered against the infiltration of liquid. The fundamental difference between the two tests is found in the amount of water that is permitted to fall and the amount of time that it is allowed to fall.

Comments

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?