LISUN JL-56 waterproof jet test device is used for IPX5 and IPX6 test

The LISUN JL-56 waterproof jet test equipment is used for testing items to evaluate whether or not they comply with the IPX5 and IPX6 waterproof levels established in the International Electrotechnical Commission (IEC) standard 60529. This standard was developed by the IEC. Ratings of IPX5 and IPX6 reflect the level of protection against the intrusion of water and pressure.

The fact that the product has been given an IPX5 classification indicates that it can withstand low-pressure water jets coming from any direction. The JL-56 apparatus employs a water jet with a predetermined flow rate and pressure to spray the product from a variety of angles over the course of a certain amount of time in order to perform the IPX5 test. During the test, the product must continue to operate as expected and not display any evidence that it has been compromised by the presence of water.

The fact that the product has been given an IPX6 classification indicates that it is resistant to high-pressure water jets coming from any direction. The JL-56 apparatus employs a water jet with a greater flow rate and pressure to spray the product from a variety of angles over the course of a predetermined amount of time in order to perform the IPX6 test. During the test, the product must continue to perform normally and show no evidence of being affected by the presence of water in order to pass the IPX5 test.

The LISUN JL-56 waterproof jet test gadget was developed to perform IPX5 and IPX6 waterproof testing in an accurate and reliable manner. It is constructed with components of the highest quality, and it is intended to conform to the stringent requirements outlined in IEC Standard 60529. The gadget is simple to use and has the potential to assist in ensuring that your goods satisfy the appropriate requirements for pressure resistance and waterproofing. This will provide piece of mind not just for you but also for your consumers.

Comments

Post a Comment

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?

Image
The flammability of different materials, such as plastics and other materials used in items such as automobile interiors, electronic devices, and electrical appliances, is evaluated using a number of different standards. Some of these standards are FMVSS 302, UL 94, and IEC 60695. Nevertheless, there are a number of important distinctions between these standards: FMVSS 302 is a specialized standard that was designed for the automotive industry to analyze the flammability of materials used in car interiors. Its purpose is to measure the combustibility of these materials. The UL 94 standard is a more comprehensive regulation that assesses the combustibility of a variety of materials, including plastics, and has applications in a number of different sectors. IEC 60695 is a global standard that is used in the process of assessing the potential for electronic and electrical equipment to catch fire. Testing Procedures The flammability of materials is determined using a variety of testing ...
Read more
Image
125 Grounding Contact Test 125.1 Grounding receptacles having a 5-15R,5-20R，6-13R，6-20R，7-15R，14-15Ror 15-15R configuration are to be subjected to the tests in this section. 125.2 Previously untested devices are to be used. Each device is to be mounted in a flush device box, or as otherwise intended, with its face in a vertical plane. A nonmetallic faceplate is to be installed if intended. A solid 14 AWG (2.1 mm2) copper conductor is to be connected to the receptacle grounding terminal. GNGPL SB1610_AL 125.3 With the receptacle oriented to create the maximum contact displacement (possible distortion of contact affecting its contact ability), the test pin A. Figure 125.1 is to be fully inserted in the grounding contact. A 5 lb (2.27 kg) weight is to be gradually suspended form the test pin 6 inches (152 mm) from the face of the receptacle. The weight is to be applied for 1 minute, following which, the weight is to be removed. The application of the weight is to be repeated with the rece...
Read more
Image
Accessible parts of equipment with standard IEC 62368 General An accessible part of an equipment is a part that can be touched by a body part. For the purposes of dctermining an accessible part, a body part is represented by one or more of the specified test probes. Accessible parts of an equipment can include parts behind a door, panel, removable cover, etc. that can be opened without the use of a tool. Accessible parts do not include those that become accessible when floor standing equipment having a mass exceeding 40 kg is tilted. For equipment intended for building-in or rack-mounting, or for subassemblies and the like for incorporation in larger equipment,accessible parts do not include those that are not accessible when the equipment or subassembly is installed according to the method of mounting or installation specified in the installation instructions. A part is considered accessible if the instructions or markings intended to be followed require that a person phys...
Read more