Application of LISUN Sand Dust Test Chamber in Reliability Testing of Electronic, Electrical, and Automotive Products
Abstract
Dust intrusion is a major threat to the reliability and service life of products in industries such as electronics, electrical engineering, and automotive manufacturing. The sand dust test chamber serves as a critical tool to simulate dusty environmental conditions, evaluate product dustproof performance, and verify compliance with industry standards. This paper focuses on the LISUN SC-010 Sand Dust Test Chamber, a representative device designed for testing the physical and functional performance of electronic and electrical products, lamps, electrical cabinets, electrical components, and automotive/motorcycle parts under simulated dust climates. It elaborates on the chamber’s compliance with IP5X and IP6X dustproof rating standards (per IEC 60529), technical specifications, test procedures, and practical applications. By analyzing test data and case studies, this paper confirms that the LISUN SC-010 Sand Dust Test Chamber provides accurate, repeatable results, supporting product design optimization, performance improvement, verification, and factory inspection.
Introduction
In industrial and outdoor environments, products such as industrial controllers, outdoor lamps, electrical distribution cabinets, and automotive engine parts are frequently exposed to dust. Fine dust particles can penetrate product enclosures, causing short circuits in electronic components, reduced heat dissipation efficiency of lamps, increased wear of mechanical parts, and even sudden product failure. According to industry data, over 18% of field failures in electronic and electrical products are directly attributed to dust intrusion (IEC, 2013). To address this issue, standardized environmental testing using a sand dust test chamber has become an indispensable step in product development and quality control.
The LISUN SC-010 Sand Dust Test Chamber, developed by LISUN Group, is tailored to meet the diverse testing needs of multiple industries. It simulates realistic dust conditions, enabling enterprises to assess product dustproof performance efficiently and ensure compliance with global standards such as IP5X and IP6X. This paper systematically explores the technical characteristics and application value of the LISUN SC-010, aiming to provide a comprehensive reference for testing institutions and manufacturers.
SC-015 Dustproof test chamber
Overview of LISUN SC-010 Sand Dust Test Chamber
Core Functions and Application Scope
The LISUN SC-010 Sand Dust Test Chamber is a medium-sized environmental testing device designed to replicate dust-laden climates. Its primary function is to conduct physical, functional, and durability tests on products across industries, including:
Electronic and electrical products: Programmable Logic Controllers (PLCs), communication modules, and power supplies;
Lamps: Outdoor street lamps, tunnel lights, and automotive headlights;
Electrical cabinets: Low-voltage distribution cabinets and industrial control cabinets;
Electrical components: Relays, connectors, and switches;
Automotive/motorcycle parts: Engine air filters, instrument panels, and carburetors.
After testing, products undergo performance verification to determine if they meet design specifications or industry standards. This data is critical for product design iterations, performance enhancements, type approval, and factory quality inspections. Notably, the LISUN SC-010 is specifically optimized for IP5X and IP6X dustproof rating tests, the most widely adopted standards for evaluating solid particle protection.
Structural Design Features
The LISUN SC-010 incorporates durable and user-centric design elements to ensure test accuracy and operational convenience:
Housing and Inner Chamber: The outer shell is constructed from high-quality domestic steel plates with a corrosion-resistant spray-painted finish, ensuring longevity and aesthetics. The inner chamber, sample rack, and dust-contact components are made of 304 stainless steel, preventing rust and avoiding dust contamination;
Observation and Lighting: A transparent tempered glass window is installed on the chamber door, allowing real-time monitoring of sample status and dust distribution. An LED light inside the chamber ensures clear visibility even in low-light conditions;
Dust Management System: A bottom-mounted dust replacement device enables 100% replacement of used dust, eliminating cross-contamination between tests. A built-in vibration device prevents dust from adhering to chamber walls or agglomerating, maintaining uniform dust concentration;
Vacuum System: For Category 1 enclosures (products with internal negative pressure during operation, e.g., due to thermal cycling), the chamber is equipped with a suction pipe and vacuum pump. This system maintains adjustable negative pressure (0~10 Kpa) inside the sample, simulating real-world operating conditions.
Test Principles and IP5X/IP6X Standards Compliance
Basic Working Principle of the Sand Dust Test Chamber
The LISUN SC-010 operates based on the closed-loop dust suspension principle specified in IEC 60529:1989+A1:1999+A2:2013 (Clause 13.4). The test process involves three key steps:
Dust Suspension: Dry talcum powder (standard test dust) is blown into the chamber via a dust circulation pump. The vibration device ensures dust remains uniformly suspended, avoiding agglomeration;
Pressure Control: For Category 1 enclosures, the vacuum pump creates negative pressure inside the sample to accelerate dust intrusion (if gaps exist). For Category 2 enclosures (no pressure difference with the environment), tests are conducted at atmospheric pressure;
Parameter Regulation: The control system precisely manages test duration, dust-blowing cycles, and vibration frequency to meet standard requirements.
Specifications for Test Dust
Test dust properties directly impact result validity. The LISUN SC-010 strictly adheres to IEC 60529 standards for dust, as outlined in Table 1:
Table 1: Test Dust Specifications for LISUN SC-010 Sand Dust Test Chamber：

Dust Property
Requirement
Rationale

Type
Dry talcum powder (impurity-free, moisture https://www.lisungroup.com/news/technology-news/application-of-lisun-sand-dust-test-chamber-in-reliability-testing-of-electronic-electrical-and-automotive-products.html

Comments

Post a Comment

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?

Image
The flammability of different materials, such as plastics and other materials used in items such as automobile interiors, electronic devices, and electrical appliances, is evaluated using a number of different standards. Some of these standards are FMVSS 302, UL 94, and IEC 60695. Nevertheless, there are a number of important distinctions between these standards: FMVSS 302 is a specialized standard that was designed for the automotive industry to analyze the flammability of materials used in car interiors. Its purpose is to measure the combustibility of these materials. The UL 94 standard is a more comprehensive regulation that assesses the combustibility of a variety of materials, including plastics, and has applications in a number of different sectors. IEC 60695 is a global standard that is used in the process of assessing the potential for electronic and electrical equipment to catch fire. Testing Procedures The flammability of materials is determined using a variety of testing ...
Read more

LISUN salt spray test chamber is designed according to ASTM-B117

Image
The ASTM-B117 standard is an internationally accepted benchmark for salt spray testing, and the LISUN salt spray test chamber was developed in accordance with this standard. This standard provides guidelines and requirements for conducting salt spray tests on materials, products, and components to evaluate their resistance to corrosion caused by exposure to salt spray or salt fog. The purpose of these tests is to determine how well a material, product, or component will hold up against exposure to salt spray or salt fog. When performing salt spray tests, the parameters that are to be used are those that are specified by the ASTM-B117 standard. These circumstances include the temperature, humidity, concentration of salt, and length of exposure. In addition to this, it offers instructions for the production of test specimens or samples, as well as techniques for assessing the test findings and performance criteria for estimating the corrosion resistance of the materials that are being...
Read more
Image
Environmental testing refers to exposing products or materials to specific conditions, either natural or artificial, to evaluate their performance under realistic storage, transportation, and usage scenarios. This type of testing is crucial for ensuring product quality and performance. High-low temperature test chambers typically involve three main types of testing: natural exposure testing, field testing, and artificial simulation testing. Natural exposure and field testing can be costly and time-consuming, with relatively poor repeatability and consistency in results. However, these tests offer valuable insights into real-world usage scenarios, providing important foundations for artificial simulation testing. Artificial simulation environmental testing is widely used in quality inspection. To ensure comparable and repeatable results, a series of standardized methods for basic environmental testing of products have been established. These standardized methods help ensure the scientif...
Read more