Test Pin UL 60950-1 Figure2B S2962D
1 General
1.1 Scope
1.1.1 Equipment covered by this standard
This standard is applicable to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V and designed to be installed in accordance with the Canadian Electrical Code.Part1.CSA C22.1 12:General Requirements-Canadian ElectricalCode.Part 11.CSA C22.2 No.0-10:the National Electrical Code.NFPA 70-2014: and the National Electrical Safety Code,IEEE C2-2012.
The standard is also applicable to equipment. unless otherwise identified by a marking or instructions. designed to be installed in accordance with Article 645 of the NationalElectrical Code.ANSI/NFPA 70. and the Standard for the Protection of Information Technology Equipment.NFPA 75-2013.
See Annex NAE for examples of and references to regulatory requirements that apply to this equipment.
This standard is also applicable to such information technology equipment:
– designed for use as telecommunication terminal equipment and TELECOMMUNICATION NETWORK infrastructure equipment, regardless of the source of power;
– designed and intended to be connected directly to, or used as infrastructure equipment in, a CABLE DISTRIBUTION SYSTEM,regardless of the source of power;
– designed to use the ACMAINS SUPPLY as a communication transmission medium (see Clause 6, Note 4 and 7.1, Note 4).
This part of UL 60950 is also applicable to:
– components and subassemblies intended for incorporation in this equipment. Such components and subassemblies need not comply with every requirement of the standard, provided that the complete equipment, incorporating such components and subassemblies, does comply;
– external power supply units intended to supply other equipment within the scope of this part of UL 60950;
– accessories intended to be used with equipment within the scope of this part of UL 60950.
SMT 1213_AL
NOTE 1 Examples of aspects with which uninstalled components, subassemblies, and accessories may not comply include the marking of the power rating and access to hazardous parts.
NOTE 2 This standard may be applied to the electronic parts of equipment even if that equipment does not wholly fall within its Scope, such as large-scale air conditioning systems, fire detection systems and fire extinguishing systems. Different requirements may be necessary for some applications.
This standard specifies requirements intended to reduce risks of fire, electric shock or injury for the OPERATOR and layman who may come into contact with the equipment and, where specifically stated, for a SERVICE PERSON.
Meets UL 60950-1
This UL 60950-1 Figure 2B Test Pin S2962D is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment (see IEC60536).
Conforms to: Standard UL 60950-1 etc.
Technical Parameter:
Test probe diameter: 3 mm
Test probe length: 15 mm
Baffle plate thickness: 4 mm
Baffle plate diameter: 25 mm
Handle length: 20 mm
Handle diameter: 10 mm
https://www.lisungroup.com/news/technology-news/test-pin-ul-60950-1-figure2b-s2962d.html

Comments

Post a Comment

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?

Image
The flammability of different materials, such as plastics and other materials used in items such as automobile interiors, electronic devices, and electrical appliances, is evaluated using a number of different standards. Some of these standards are FMVSS 302, UL 94, and IEC 60695. Nevertheless, there are a number of important distinctions between these standards: FMVSS 302 is a specialized standard that was designed for the automotive industry to analyze the flammability of materials used in car interiors. Its purpose is to measure the combustibility of these materials. The UL 94 standard is a more comprehensive regulation that assesses the combustibility of a variety of materials, including plastics, and has applications in a number of different sectors. IEC 60695 is a global standard that is used in the process of assessing the potential for electronic and electrical equipment to catch fire. Testing Procedures The flammability of materials is determined using a variety of testing ...
Read more
Image
125 Grounding Contact Test 125.1 Grounding receptacles having a 5-15R,5-20R，6-13R，6-20R，7-15R，14-15Ror 15-15R configuration are to be subjected to the tests in this section. 125.2 Previously untested devices are to be used. Each device is to be mounted in a flush device box, or as otherwise intended, with its face in a vertical plane. A nonmetallic faceplate is to be installed if intended. A solid 14 AWG (2.1 mm2) copper conductor is to be connected to the receptacle grounding terminal. GNGPL SB1610_AL 125.3 With the receptacle oriented to create the maximum contact displacement (possible distortion of contact affecting its contact ability), the test pin A. Figure 125.1 is to be fully inserted in the grounding contact. A 5 lb (2.27 kg) weight is to be gradually suspended form the test pin 6 inches (152 mm) from the face of the receptacle. The weight is to be applied for 1 minute, following which, the weight is to be removed. The application of the weight is to be repeated with the rece...
Read more
Image
Accessible parts of equipment with standard IEC 62368 General An accessible part of an equipment is a part that can be touched by a body part. For the purposes of dctermining an accessible part, a body part is represented by one or more of the specified test probes. Accessible parts of an equipment can include parts behind a door, panel, removable cover, etc. that can be opened without the use of a tool. Accessible parts do not include those that become accessible when floor standing equipment having a mass exceeding 40 kg is tilted. For equipment intended for building-in or rack-mounting, or for subassemblies and the like for incorporation in larger equipment,accessible parts do not include those that are not accessible when the equipment or subassembly is installed according to the method of mounting or installation specified in the installation instructions. A part is considered accessible if the instructions or markings intended to be followed require that a person phys...
Read more