Analysis of IK Level Impact Test Standard for IK Spring Impact Hammer
The IK spring impact hammer is a tool used to test the protection level of electrical equipment enclosures. According to the International Electrotechnical Commission (IEC) standards, the IK level system is classified based on the degree of impact the equipment can withstand. This article will analyze in detail the IK level impact test standard for the IK spring impact hammer.

I. Definition of IK Level

IK level refers to the degree of impact the equipment enclosure can withstand during testing. There are a total of 11 levels from 0 to 10, with higher numbers indicating higher impact resistance of the equipment.

II. IK Level Testing

The IK level testing of the IK spring impact hammer consists of two parts: impact test and rating. The impact test evaluates the ability of the equipment enclosure to withstand impact by using the IK spring impact hammer. The rating assigns the equipment to the appropriate IK level based on the results of the impact test.

III. Impact Test

The IK level impact test is conducted in a laboratory by using the IK spring impact hammer to impact the equipment enclosure. The impact hammer consists of a hammer head and a spring. The spring is used to control the impact force of the hammer head to ensure consistency ofthe test.

In the impact test, the equipment enclosure is placed on a specific holder to ensure its stability. The impact hammer impacts the equipment at different speeds and angles. The process and parameters of the impact test are determined according to the IK level standard specification.

IV. Rating

After completing the impact test, the equipment enclosure is assigned to the appropriate IK level based on its performance.

There are 11 IK levels from 0 to 10, each with different requirements for impact energy. Level 0 indicates that the equipment does not have any impact protection capability, while level 10 indicates that the equipment has the highest level of impact protection capability.

The rating process involves analyzing the enclosure and comparing the test results. The performance of the enclosure typically includes changes in appearance, fractures, displacement of protrusions, etc. Comparing the test results requires comparing the impact energy in the impact test with the specified impact energy in the IK level standard.

If the equipment enclosure does not show any damage or deformation during the impact test, and the impact energy meets the requirements of a specific level, then the equipment can be rated at that level.

V. Significance of IK Level

The IK level determines the level of protection of the equipment enclosure and can help users choose the appropriate equipment for theirneeds. Different application scenarios and environments have different requirements for equipment protection, and the IK level can help users understand the impact resistance performance of the equipment.

For example, when installing equipment outdoors, a higher IK level may be required to resist strong winds, rain, and other adverse weather conditions. In indoor environments, a lower IK level may already be sufficient to protect the equipment from normal impacts and collisions.

The IK level also serves as a symbol of equipment quality, as a higher IK level generally indicates better material and manufacturing quality of the equipment.

The IK level impact test standard for the IK spring impact hammer is an important standard for testing the protection level of electrical equipment enclosures. Through the impact test and rating, the impact resistance performance of the equipment can be determined and assigned to the appropriate IK level. The significance of the IK level lies in helping users choose the right equipment for their needs and providing a symbol of equipment quality. Whether indoors or outdoors, understanding the IK level of the equipment can ensure that it has sufficient protection in specific environments and prolong its service life.

IK01-06 Spring Impact Hammer is used to simulate the mechanical impact that the tested product may encounter in normal use, so as to check the ability of the tested product shell to withstand mechanical impact. It is suitable for mechanical strength test of enclosures, operating levers, handles, knobs, indicator lights, signal lights and lamp shades of accessories such as household and similar lighting fixtures, household appliances, and electronic products to ensure that the tested products can withstand possible reckless operations. and other accidents, so that the tested product can operate normally and safely and reliably.

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator Guns, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.

Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381

Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997
https://www.lisungroup.com/news/technology-news/analysis-of-ik-level-impact-test-standard-for-ik-spring-impact-hammer.html

Comments

Post a Comment

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?

Image
The flammability of different materials, such as plastics and other materials used in items such as automobile interiors, electronic devices, and electrical appliances, is evaluated using a number of different standards. Some of these standards are FMVSS 302, UL 94, and IEC 60695. Nevertheless, there are a number of important distinctions between these standards: FMVSS 302 is a specialized standard that was designed for the automotive industry to analyze the flammability of materials used in car interiors. Its purpose is to measure the combustibility of these materials. The UL 94 standard is a more comprehensive regulation that assesses the combustibility of a variety of materials, including plastics, and has applications in a number of different sectors. IEC 60695 is a global standard that is used in the process of assessing the potential for electronic and electrical equipment to catch fire. Testing Procedures The flammability of materials is determined using a variety of testing ...
Read more
Image
125 Grounding Contact Test 125.1 Grounding receptacles having a 5-15R,5-20R，6-13R，6-20R，7-15R，14-15Ror 15-15R configuration are to be subjected to the tests in this section. 125.2 Previously untested devices are to be used. Each device is to be mounted in a flush device box, or as otherwise intended, with its face in a vertical plane. A nonmetallic faceplate is to be installed if intended. A solid 14 AWG (2.1 mm2) copper conductor is to be connected to the receptacle grounding terminal. GNGPL SB1610_AL 125.3 With the receptacle oriented to create the maximum contact displacement (possible distortion of contact affecting its contact ability), the test pin A. Figure 125.1 is to be fully inserted in the grounding contact. A 5 lb (2.27 kg) weight is to be gradually suspended form the test pin 6 inches (152 mm) from the face of the receptacle. The weight is to be applied for 1 minute, following which, the weight is to be removed. The application of the weight is to be repeated with the rece...
Read more
Image
Accessible parts of equipment with standard IEC 62368 General An accessible part of an equipment is a part that can be touched by a body part. For the purposes of dctermining an accessible part, a body part is represented by one or more of the specified test probes. Accessible parts of an equipment can include parts behind a door, panel, removable cover, etc. that can be opened without the use of a tool. Accessible parts do not include those that become accessible when floor standing equipment having a mass exceeding 40 kg is tilted. For equipment intended for building-in or rack-mounting, or for subassemblies and the like for incorporation in larger equipment,accessible parts do not include those that are not accessible when the equipment or subassembly is installed according to the method of mounting or installation specified in the installation instructions. A part is considered accessible if the instructions or markings intended to be followed require that a person phys...
Read more