The Future of Goniophotometry: Emerging Technologies and Trends

Introduction



Goniophotometry is a tried-and-true technology that has been used for a good number of years as a means of measuring and describing light. In order to keep up with the always shifting requirements of business, goniophotometers are also consistently advancing in their capabilities. This article focuses on new advancements in technology and other areas that have the potential to influence the path that goniophotometry will take in the future.




These advancements have the potential to improve the accuracy, efficiency, and flexibility of goniophotometric measurements in a variety of ways, ranging from improved measuring techniques to novel application possibilities. Keeping up with the latest developments allows researchers, manufacturers, and lighting professionals to maintain their positions at the forefront of their respective industries.




Advanced Measurement Techniques



Future progress in goniophotometry will come from refining existing measuring methods to increase precision and productivity. Some recent, significant developments are as follows:




Spatially Resolved Goniophotometry: When using a typical goniophotometer, you will get results that are representative of the light distribution on the whole. However, the development of new techniques has made it feasible to conduct spatially resolved measurements. This indicates that it is now possible for us to get information of a finer granularity from a number of different points on the measurement plane.


https://www.lisungroup.com/news/technology-news/the-future-of-goniophotometry-emerging-technologies-and-trends.html

Comments

Post a Comment

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?

Image
The flammability of different materials, such as plastics and other materials used in items such as automobile interiors, electronic devices, and electrical appliances, is evaluated using a number of different standards. Some of these standards are FMVSS 302, UL 94, and IEC 60695. Nevertheless, there are a number of important distinctions between these standards: FMVSS 302 is a specialized standard that was designed for the automotive industry to analyze the flammability of materials used in car interiors. Its purpose is to measure the combustibility of these materials. The UL 94 standard is a more comprehensive regulation that assesses the combustibility of a variety of materials, including plastics, and has applications in a number of different sectors. IEC 60695 is a global standard that is used in the process of assessing the potential for electronic and electrical equipment to catch fire. Testing Procedures The flammability of materials is determined using a variety of testing ...
Read more
Image
125 Grounding Contact Test 125.1 Grounding receptacles having a 5-15R,5-20R，6-13R，6-20R，7-15R，14-15Ror 15-15R configuration are to be subjected to the tests in this section. 125.2 Previously untested devices are to be used. Each device is to be mounted in a flush device box, or as otherwise intended, with its face in a vertical plane. A nonmetallic faceplate is to be installed if intended. A solid 14 AWG (2.1 mm2) copper conductor is to be connected to the receptacle grounding terminal. GNGPL SB1610_AL 125.3 With the receptacle oriented to create the maximum contact displacement (possible distortion of contact affecting its contact ability), the test pin A. Figure 125.1 is to be fully inserted in the grounding contact. A 5 lb (2.27 kg) weight is to be gradually suspended form the test pin 6 inches (152 mm) from the face of the receptacle. The weight is to be applied for 1 minute, following which, the weight is to be removed. The application of the weight is to be repeated with the rece...
Read more
Image
Accessible parts of equipment with standard IEC 62368 General An accessible part of an equipment is a part that can be touched by a body part. For the purposes of dctermining an accessible part, a body part is represented by one or more of the specified test probes. Accessible parts of an equipment can include parts behind a door, panel, removable cover, etc. that can be opened without the use of a tool. Accessible parts do not include those that become accessible when floor standing equipment having a mass exceeding 40 kg is tilted. For equipment intended for building-in or rack-mounting, or for subassemblies and the like for incorporation in larger equipment,accessible parts do not include those that are not accessible when the equipment or subassembly is installed according to the method of mounting or installation specified in the installation instructions. A part is considered accessible if the instructions or markings intended to be followed require that a person phys...
Read more