Environmental temperature humidity test for electronic accessories

The method of quality control for electrical accessories must always include testing for temperature and humidity, which must be carried out in an environment that is under controlled conditions. In order to assess how effectively electronic devices function and how dependable they are in a wide range of settings, the goal of the evaluation is to carry out a series of tests. These tests are designed to determine whether or not the devices are capable of functioning correctly in a variety of temperature and humidity situations, both of which have the potential to impair their performance as well as their longevity. The tests are designed to determine whether or not the devices are capable of functioning correctly in a variety of temperature and humidity situations. 

These examinations also serve the purpose of identifying any potential issues that may emerge as a consequence of extended exposure to high temperatures or high levels of humidity. Corrosion, condensation, and the deterioration of insulation are a few examples of the difficulties that might arise as a result of this. When performing environmental testing on electronic and electrical equipment, the processes that should be followed are outlined in the international standard known as IEC 60068-2. These tests are carried out in compliance with this standard.


The standard outlines a number of different testing protocols for temperature and humidity, including tests carried out in a static environment, tests in which the temperature is varied throughout the duration of the test, and tests in which the subject is put through a combination of temperature and humidity. The producers and suppliers of electronic accessories may be able to guarantee that their products are of a high quality and are able to fulfill the criteria of the environment in which they are meant to be used by putting such products through the tests that have been mentioned above. This may be the case if the manufacturers and suppliers of such products subject their products to the tests that have been mentioned above.

Comments

Post a Comment

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?

Image
The flammability of different materials, such as plastics and other materials used in items such as automobile interiors, electronic devices, and electrical appliances, is evaluated using a number of different standards. Some of these standards are FMVSS 302, UL 94, and IEC 60695. Nevertheless, there are a number of important distinctions between these standards: FMVSS 302 is a specialized standard that was designed for the automotive industry to analyze the flammability of materials used in car interiors. Its purpose is to measure the combustibility of these materials. The UL 94 standard is a more comprehensive regulation that assesses the combustibility of a variety of materials, including plastics, and has applications in a number of different sectors. IEC 60695 is a global standard that is used in the process of assessing the potential for electronic and electrical equipment to catch fire. Testing Procedures The flammability of materials is determined using a variety of testing ...
Read more
Image
125 Grounding Contact Test 125.1 Grounding receptacles having a 5-15R,5-20R，6-13R，6-20R，7-15R，14-15Ror 15-15R configuration are to be subjected to the tests in this section. 125.2 Previously untested devices are to be used. Each device is to be mounted in a flush device box, or as otherwise intended, with its face in a vertical plane. A nonmetallic faceplate is to be installed if intended. A solid 14 AWG (2.1 mm2) copper conductor is to be connected to the receptacle grounding terminal. GNGPL SB1610_AL 125.3 With the receptacle oriented to create the maximum contact displacement (possible distortion of contact affecting its contact ability), the test pin A. Figure 125.1 is to be fully inserted in the grounding contact. A 5 lb (2.27 kg) weight is to be gradually suspended form the test pin 6 inches (152 mm) from the face of the receptacle. The weight is to be applied for 1 minute, following which, the weight is to be removed. The application of the weight is to be repeated with the rece...
Read more
Image
Accessible parts of equipment with standard IEC 62368 General An accessible part of an equipment is a part that can be touched by a body part. For the purposes of dctermining an accessible part, a body part is represented by one or more of the specified test probes. Accessible parts of an equipment can include parts behind a door, panel, removable cover, etc. that can be opened without the use of a tool. Accessible parts do not include those that become accessible when floor standing equipment having a mass exceeding 40 kg is tilted. For equipment intended for building-in or rack-mounting, or for subassemblies and the like for incorporation in larger equipment,accessible parts do not include those that are not accessible when the equipment or subassembly is installed according to the method of mounting or installation specified in the installation instructions. A part is considered accessible if the instructions or markings intended to be followed require that a person phys...
Read more