High and low temperature test against LED road light

The method of quality control for LED road lights includes testing at a range of temperatures, including high and low temperatures. This kind of testing is helpful for determining the performance and dependability of the lights under settings of very high temperature.

During the high temperature test, the LED road lights are subjected to temperatures that are greater than the temperatures that are typically within their operational range. This creates an environment similar to what the lights could experience in very hot temperatures, such as deserts and tropical areas. The effectiveness of the lights is evaluated, taking into account aspects such as their brightness, color correctness, and longevity. The manufacturer is then able to detect any possible failure spots, such as overheating or deterioration of the LED components, and make adjustments to the design and construction of the lights to solve these concerns.

During the test for low temperature, the LED road lights are subjected to temperatures that are lower than the typical functioning range for their lights. This creates an environment similar to what the lights could experience in chilly environments, such as the polar regions. The effectiveness of the lights is evaluated, taking into account aspects such as their brightness, color correctness, and longevity. The manufacturer may then detect any possible failure spots, such as decreased performance or greater susceptibility to breakage, and make adjustments to the design and construction of the lights to solve these concerns.

Testing LED road lights at both high and low temperatures is essential since it helps to verify that the lights will function as intended over a broad variety of temperature conditions. This results in increased levels of customer satisfaction as well as enhanced levels of dependability and a competitive edge in the market. Additionally, high and low temperature testing is often needed by international standards and regulations, such as IEC, JIS, and GB. Because of this, it is a vital component of the process that is used to ensure the quality of LED road lights.

In conclusion, the testing of LED road lights for high and low temperatures is a crucial component of the process for controlling the quality of the lights. The makers are able to evaluate the performance and dependability of their goods, determine probable failure sites, and make changes to the design and manufacturing of their products by subjecting the lights to high temperature conditions. This results in increased levels of customer satisfaction as well as enhanced levels of dependability and a competitive edge in the market.

Comments

Post a Comment

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?

Image
The flammability of different materials, such as plastics and other materials used in items such as automobile interiors, electronic devices, and electrical appliances, is evaluated using a number of different standards. Some of these standards are FMVSS 302, UL 94, and IEC 60695. Nevertheless, there are a number of important distinctions between these standards: FMVSS 302 is a specialized standard that was designed for the automotive industry to analyze the flammability of materials used in car interiors. Its purpose is to measure the combustibility of these materials. The UL 94 standard is a more comprehensive regulation that assesses the combustibility of a variety of materials, including plastics, and has applications in a number of different sectors. IEC 60695 is a global standard that is used in the process of assessing the potential for electronic and electrical equipment to catch fire. Testing Procedures The flammability of materials is determined using a variety of testing ...
Read more
Image
125 Grounding Contact Test 125.1 Grounding receptacles having a 5-15R,5-20R，6-13R，6-20R，7-15R，14-15Ror 15-15R configuration are to be subjected to the tests in this section. 125.2 Previously untested devices are to be used. Each device is to be mounted in a flush device box, or as otherwise intended, with its face in a vertical plane. A nonmetallic faceplate is to be installed if intended. A solid 14 AWG (2.1 mm2) copper conductor is to be connected to the receptacle grounding terminal. GNGPL SB1610_AL 125.3 With the receptacle oriented to create the maximum contact displacement (possible distortion of contact affecting its contact ability), the test pin A. Figure 125.1 is to be fully inserted in the grounding contact. A 5 lb (2.27 kg) weight is to be gradually suspended form the test pin 6 inches (152 mm) from the face of the receptacle. The weight is to be applied for 1 minute, following which, the weight is to be removed. The application of the weight is to be repeated with the rece...
Read more
Image
Accessible parts of equipment with standard IEC 62368 General An accessible part of an equipment is a part that can be touched by a body part. For the purposes of dctermining an accessible part, a body part is represented by one or more of the specified test probes. Accessible parts of an equipment can include parts behind a door, panel, removable cover, etc. that can be opened without the use of a tool. Accessible parts do not include those that become accessible when floor standing equipment having a mass exceeding 40 kg is tilted. For equipment intended for building-in or rack-mounting, or for subassemblies and the like for incorporation in larger equipment,accessible parts do not include those that are not accessible when the equipment or subassembly is installed according to the method of mounting or installation specified in the installation instructions. A part is considered accessible if the instructions or markings intended to be followed require that a person phys...
Read more