LISUN designs different sizes of salt fog chambers according to different products

Salt fog chambers are used to evaluate the corrosion resistance of materials and coatings in a controlled environment. LISUN is a maker of salt fog chambers, which are used for this purpose. LISUN creates salt fog chambers in a variety of sizes so that they may test a broad variety of items and fulfill a variety of testing criteria.

The corrosive effects of a salt-laden atmosphere, such as those seen in marine or coastal locations, may be replicated in LISUN's salt fog chambers, which have been built to conform to a number of industry standards such as ASTM-B117 and IEC 60068-2 and are used to perform corrosion testing. The chambers are made to offer a controlled atmosphere, and the specimens that are going to be examined are going to be subjected to a fine mist of salt spray solution inside of those chambers.

Salt fog chambers are available from LISUN in a variety of sizes, ranging from walk-in models for big specimens and assemblies to bench-top units that are suitable for testing tiny components. The chambers have the capability of being outfitted with a variety of features, including temperature and relative humidity control systems, spray nozzle systems, specimen holders, and more.


LISUN is able to test a broad variety of items because the company uses salt fog chambers of varying sizes. These chambers enable LISUN to test anything from tiny electronic components to huge automobile assembly. In order to provide precise and dependable test results, the chambers have been built to suit the particular criteria that are associated with each application.

In conclusion, LISUN creates salt fog chambers of varying sizes so that they may fulfill the testing requirements for a diverse selection of items. The testing of both tiny components and huge assemblies is made possible via the use of chambers of varying sizes. These chambers are intended to offer a controlled environment as well as reliable findings from the testing process. The chambers were developed to be compliant with industry standards such as ASTM-B117 and IEC 60068-2, and they are able to give vital information on the corrosion resistance of materials and coatings.

Comments

Post a Comment

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?

Image
The flammability of different materials, such as plastics and other materials used in items such as automobile interiors, electronic devices, and electrical appliances, is evaluated using a number of different standards. Some of these standards are FMVSS 302, UL 94, and IEC 60695. Nevertheless, there are a number of important distinctions between these standards: FMVSS 302 is a specialized standard that was designed for the automotive industry to analyze the flammability of materials used in car interiors. Its purpose is to measure the combustibility of these materials. The UL 94 standard is a more comprehensive regulation that assesses the combustibility of a variety of materials, including plastics, and has applications in a number of different sectors. IEC 60695 is a global standard that is used in the process of assessing the potential for electronic and electrical equipment to catch fire. Testing Procedures The flammability of materials is determined using a variety of testing ...
Read more
Image
125 Grounding Contact Test 125.1 Grounding receptacles having a 5-15R,5-20R，6-13R，6-20R，7-15R，14-15Ror 15-15R configuration are to be subjected to the tests in this section. 125.2 Previously untested devices are to be used. Each device is to be mounted in a flush device box, or as otherwise intended, with its face in a vertical plane. A nonmetallic faceplate is to be installed if intended. A solid 14 AWG (2.1 mm2) copper conductor is to be connected to the receptacle grounding terminal. GNGPL SB1610_AL 125.3 With the receptacle oriented to create the maximum contact displacement (possible distortion of contact affecting its contact ability), the test pin A. Figure 125.1 is to be fully inserted in the grounding contact. A 5 lb (2.27 kg) weight is to be gradually suspended form the test pin 6 inches (152 mm) from the face of the receptacle. The weight is to be applied for 1 minute, following which, the weight is to be removed. The application of the weight is to be repeated with the rece...
Read more
Image
Accessible parts of equipment with standard IEC 62368 General An accessible part of an equipment is a part that can be touched by a body part. For the purposes of dctermining an accessible part, a body part is represented by one or more of the specified test probes. Accessible parts of an equipment can include parts behind a door, panel, removable cover, etc. that can be opened without the use of a tool. Accessible parts do not include those that become accessible when floor standing equipment having a mass exceeding 40 kg is tilted. For equipment intended for building-in or rack-mounting, or for subassemblies and the like for incorporation in larger equipment,accessible parts do not include those that are not accessible when the equipment or subassembly is installed according to the method of mounting or installation specified in the installation instructions. A part is considered accessible if the instructions or markings intended to be followed require that a person phys...
Read more