What equipment do you need for IP67 IP code test?
The IP67 IP code test is intended to determine the degree of protection afforded to electronic and electrical equipment against the intrusion of water. The fact that the device has been given an IP67 classification suggests that it can withstand being submerged in water up to a depth of one meter.
A number of different pieces of apparatus are needed in order to carry out an IP67 test. These are the following:
- Waterproof Container: A watertight container that is both big enough to hold the product and is capable of holding enough water to completely immerse the product.
- Water Bath: A water bath that is capable of holding the watertight container and may be filled with water to a certain level is referred to as a water bath.
- A device that is used to measure the flow rate of water that is utilized in the test is called a water flow meter.
- A gadget known as a pressure gauge, it is used for the purpose of measuring the water pressure that is present throughout the test.
- A timer is a gadget that is used in order to maintain track of the length of the test.
- A gadget known as a Waterproof Test Probe, it is used to monitor the product being tested for any signs of water infiltration while the test is being conducted.
In order for the
manufacturer to carry out the IP67 test, the testing gear, which consists of a
watertight container, a water bath, a water flow meter, a pressure gauge, a
timer, and a waterproof test probe, should be prepared. After this, the product
should be put into the airtight container, and the container should then be
completely immersed in the water bath. The IP67 test standards are set by the
International Electrotechnical Commission (IEC) standard known as IEC 60529.
The water flow rate, pressure, and test duration should all be in conformity
with these criteria. During the test, the product need to be monitored
carefully for any signs of water seepage. If the product is able to pass the
IP67 test, it is regarded as being protected against the effects of being
submerged in water up to a depth of one meter.
In conclusion, the IP67
test is designed to evaluate the product's ability to withstand immersion in
water up to a depth of one meter and to ensure that the product is protected
against water ingress. Additionally, the test is designed to determine whether
or not the product can prevent water from entering the product. A watertight
container, a water bath, a water flow meter, a pressure gauge, a timer, and a
waterproof test probe are all included in the IP67 testing gear. The
manufacturer is responsible for setting up the testing gear, placing the
product within the watertight container, and then completely immersing the
container in the water bath for the allotted amount of time. During the test,
the product need to be monitored carefully for any signs of water seepage.
Comments
Post a Comment