How to use LISUN OSP1102 oscilloscope?

Electrical signals may be seen and measured with the help of the LISUN OSP1102 oscilloscope, which is a digital storage oscilloscope (DSO). In most cases, it is used to diagnose and fix problems with electrical circuits, as well as to evaluate the shapes of waveforms and carry out signal analysis.

Follow these instructions in order to utilize the LISUN OSP1102 oscilloscope:

  • Using the probe cables, connect the signal that is going to be measured to the appropriate input channels on the oscilloscope.
  • After turning on the oscilloscope, choose the channel that you want to observe on.
  • Make any necessary adjustments to the vertical scale, location, and coupling in order to get an accurate reading of the signal you want to measure.
  • Make the necessary adjustments to the horizontal scale to determine the time base that will be shown. This time base will specify the time interval that is being displayed.
  • You will need to adjust the trigger level as well as the trigger source in order to steady the display and record the signal of interest.
  • Using the oscilloscope's measurement features, observe the signal waveform that is shown on the screen and make measurements of different characteristics. Some of these parameters include amplitude, frequency, rise time, and others.
  • Make advantage of the oscilloscope's storage and recall features in order to preserve a waveform for later use in analysis or report writing.

In order to prevent damage to the oscilloscope or the device that is being evaluated, it is essential to make sure that the appropriate probe and connection techniques are used. Additionally, make sure that you always follow the safety measures as well as the directions provided by the manufacturer.

An intuitive user interface and a wide range of features, such as automated measurement, FFT analysis, and arithmetic functions, are included in the LISUN OSP1102 oscilloscope, which makes it possible to do more sophisticated signal analysis. It is advised that you read the instructions and get familiar with the oscilloscope's many features and functions in order to get the most out of it and make the most of its potential. 

Comments

Post a Comment

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?

Image
The flammability of different materials, such as plastics and other materials used in items such as automobile interiors, electronic devices, and electrical appliances, is evaluated using a number of different standards. Some of these standards are FMVSS 302, UL 94, and IEC 60695. Nevertheless, there are a number of important distinctions between these standards: FMVSS 302 is a specialized standard that was designed for the automotive industry to analyze the flammability of materials used in car interiors. Its purpose is to measure the combustibility of these materials. The UL 94 standard is a more comprehensive regulation that assesses the combustibility of a variety of materials, including plastics, and has applications in a number of different sectors. IEC 60695 is a global standard that is used in the process of assessing the potential for electronic and electrical equipment to catch fire. Testing Procedures The flammability of materials is determined using a variety of testing ...
Read more
Image
125 Grounding Contact Test 125.1 Grounding receptacles having a 5-15R,5-20R，6-13R，6-20R，7-15R，14-15Ror 15-15R configuration are to be subjected to the tests in this section. 125.2 Previously untested devices are to be used. Each device is to be mounted in a flush device box, or as otherwise intended, with its face in a vertical plane. A nonmetallic faceplate is to be installed if intended. A solid 14 AWG (2.1 mm2) copper conductor is to be connected to the receptacle grounding terminal. GNGPL SB1610_AL 125.3 With the receptacle oriented to create the maximum contact displacement (possible distortion of contact affecting its contact ability), the test pin A. Figure 125.1 is to be fully inserted in the grounding contact. A 5 lb (2.27 kg) weight is to be gradually suspended form the test pin 6 inches (152 mm) from the face of the receptacle. The weight is to be applied for 1 minute, following which, the weight is to be removed. The application of the weight is to be repeated with the rece...
Read more
Image
Accessible parts of equipment with standard IEC 62368 General An accessible part of an equipment is a part that can be touched by a body part. For the purposes of dctermining an accessible part, a body part is represented by one or more of the specified test probes. Accessible parts of an equipment can include parts behind a door, panel, removable cover, etc. that can be opened without the use of a tool. Accessible parts do not include those that become accessible when floor standing equipment having a mass exceeding 40 kg is tilted. For equipment intended for building-in or rack-mounting, or for subassemblies and the like for incorporation in larger equipment,accessible parts do not include those that are not accessible when the equipment or subassembly is installed according to the method of mounting or installation specified in the installation instructions. A part is considered accessible if the instructions or markings intended to be followed require that a person phys...
Read more