How to do waterproof test against LED lighting products?

It is crucial to conduct waterproof testing on LED lighting devices to guarantee that the product is both safe and able to perform properly in damp situations. There are a few different ways to verify the waterproofness of LED lighting devices, including the following:

  • The immersion test includes submerging an LED lighting product in a container of water for a certain length of time in order to determine whether or not any of the liquid penetrates the product. This test is normally carried out in line with the IPX8 standard, which defines the requirements for waterproof functionality and serves as the benchmark.
  • Spray Test: In this test, we will use a spray nozzle to imitate several types of water exposure, such as rain or other kinds of water. In order to determine whether or not any water is able to infiltrate into the LED lighting product, it is first put in a fixture and then sprayed with water from a variety of directions.
  • Test of High-Pressure Spray: This test is quite similar to the spray test; however, the water pressure is raised in this test to imitate the effects of severe weather. This test is often carried out on goods that are designed to be used in the open air or in settings that are anticipated to be subjected to high concentrations of water.
  • The drip test includes dropping water onto an LED lighting product from a predetermined height for a certain length of time in order to determine whether or not any water permeates into the product.
  • The pressure test includes applying pressure to an LED lighting product in order to determine whether or not any water penetrates the device while it is under pressure. The product is normally filled with water before being subjected to this test, which is followed by the water being subjected to pressure using a pump.

It is vital to utilize testing equipment that is especially developed for LED lighting products and to follow the manufacturer's instructions for waterproof testing. In general, it is important to follow the manufacturer's guidelines. This will assist in ensuring that the tests are carried out in a controlled and consistent way, and that the findings appropriately represent the product's ability to withstand the effects of water.

In conclusion, the process of quality control for LED lighting products must include testing for waterproofness as an essential stage. It is possible for manufacturers to verify that their goods are safe and effective in wet conditions by conducting waterproof testing on such items. This helps to boost customer satisfaction and reduces the possibility of product returns or liability claims being made against the manufacturer.

Comments

Post a Comment

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?

Image
The flammability of different materials, such as plastics and other materials used in items such as automobile interiors, electronic devices, and electrical appliances, is evaluated using a number of different standards. Some of these standards are FMVSS 302, UL 94, and IEC 60695. Nevertheless, there are a number of important distinctions between these standards: FMVSS 302 is a specialized standard that was designed for the automotive industry to analyze the flammability of materials used in car interiors. Its purpose is to measure the combustibility of these materials. The UL 94 standard is a more comprehensive regulation that assesses the combustibility of a variety of materials, including plastics, and has applications in a number of different sectors. IEC 60695 is a global standard that is used in the process of assessing the potential for electronic and electrical equipment to catch fire. Testing Procedures The flammability of materials is determined using a variety of testing ...
Read more
Image
125 Grounding Contact Test 125.1 Grounding receptacles having a 5-15R,5-20R，6-13R，6-20R，7-15R，14-15Ror 15-15R configuration are to be subjected to the tests in this section. 125.2 Previously untested devices are to be used. Each device is to be mounted in a flush device box, or as otherwise intended, with its face in a vertical plane. A nonmetallic faceplate is to be installed if intended. A solid 14 AWG (2.1 mm2) copper conductor is to be connected to the receptacle grounding terminal. GNGPL SB1610_AL 125.3 With the receptacle oriented to create the maximum contact displacement (possible distortion of contact affecting its contact ability), the test pin A. Figure 125.1 is to be fully inserted in the grounding contact. A 5 lb (2.27 kg) weight is to be gradually suspended form the test pin 6 inches (152 mm) from the face of the receptacle. The weight is to be applied for 1 minute, following which, the weight is to be removed. The application of the weight is to be repeated with the rece...
Read more
Image
Accessible parts of equipment with standard IEC 62368 General An accessible part of an equipment is a part that can be touched by a body part. For the purposes of dctermining an accessible part, a body part is represented by one or more of the specified test probes. Accessible parts of an equipment can include parts behind a door, panel, removable cover, etc. that can be opened without the use of a tool. Accessible parts do not include those that become accessible when floor standing equipment having a mass exceeding 40 kg is tilted. For equipment intended for building-in or rack-mounting, or for subassemblies and the like for incorporation in larger equipment,accessible parts do not include those that are not accessible when the equipment or subassembly is installed according to the method of mounting or installation specified in the installation instructions. A part is considered accessible if the instructions or markings intended to be followed require that a person phys...
Read more