Why do we need a thermal test chamber for the LED products test?

Thermal testing is carried out in a thermal chamber, also known as an environmental test chamber. The Thermal Chamber utilizes convection to carry out thermal testing. In most cases, a fan is utilized for the forced air convection, much as in the convection oven you have at home; however, rather than baking cookies, you will evaluate various pieces of machinery and items.

"Thermal shock" refers to the quick transitions between two highly different temperatures applied to the component.

This is accomplished with testing chambers or thermal platforms, which either use high-performance heating and cooling in a single chamber zone or automatically shift the component being tested from one hot chamber to another neighboring cold chamber. Now you know it takes more than just an oven that uses convection cooking techniques.

Keeping up with testing requirements in the sector is also crucial.

It may modify some of the industry's norms and recommendations for testing to fit new circumstances. If you want to make sure it's up to snuff for its intended use, a thermal platform or environmental chamber is what you'll need.

Uses for LED products

Solar-powered LED lights, outdoor lighting, underground lighting, vehicle lighting, fountain lighting, and even displays may all be put through their paces in a thermal shock test chamber.

The thermal expansion and contraction that may result from a chemical or physical alteration were put through their paces by subjecting a set of LED lights to an immediate and continuous high-temperature and very low-temperature environment.

Features

  1. It looks great, and it's easy to use.
  2. Two-chamber designs allow for automated temperature regulation, a prolonged stay, and a programmable switch-over period between high and low temperatures.
  3. Compressor overpressure, overload, and short water are just some of the problems that may be prevented by the many warning features provided by this flawless safety system.
  4. The equipment contains an emergency stop button and an LCD screen that displays the cause of the alert and instructions for troubleshooting.
  5. Within 1 minute, both cold and hot shock temperatures have returned to normal, meeting the requirements of MTL, IEC, JIS, GJB, and other international standards.

Comments

Post a Comment

Popular posts from this blog

What are the differences of FMVSS 302, UL94 and IEC60695 for flammability test?

Image
The flammability of different materials, such as plastics and other materials used in items such as automobile interiors, electronic devices, and electrical appliances, is evaluated using a number of different standards. Some of these standards are FMVSS 302, UL 94, and IEC 60695. Nevertheless, there are a number of important distinctions between these standards: FMVSS 302 is a specialized standard that was designed for the automotive industry to analyze the flammability of materials used in car interiors. Its purpose is to measure the combustibility of these materials. The UL 94 standard is a more comprehensive regulation that assesses the combustibility of a variety of materials, including plastics, and has applications in a number of different sectors. IEC 60695 is a global standard that is used in the process of assessing the potential for electronic and electrical equipment to catch fire. Testing Procedures The flammability of materials is determined using a variety of testing ...
Read more
Image
125 Grounding Contact Test 125.1 Grounding receptacles having a 5-15R,5-20R，6-13R，6-20R，7-15R，14-15Ror 15-15R configuration are to be subjected to the tests in this section. 125.2 Previously untested devices are to be used. Each device is to be mounted in a flush device box, or as otherwise intended, with its face in a vertical plane. A nonmetallic faceplate is to be installed if intended. A solid 14 AWG (2.1 mm2) copper conductor is to be connected to the receptacle grounding terminal. GNGPL SB1610_AL 125.3 With the receptacle oriented to create the maximum contact displacement (possible distortion of contact affecting its contact ability), the test pin A. Figure 125.1 is to be fully inserted in the grounding contact. A 5 lb (2.27 kg) weight is to be gradually suspended form the test pin 6 inches (152 mm) from the face of the receptacle. The weight is to be applied for 1 minute, following which, the weight is to be removed. The application of the weight is to be repeated with the rece...
Read more
Image
Accessible parts of equipment with standard IEC 62368 General An accessible part of an equipment is a part that can be touched by a body part. For the purposes of dctermining an accessible part, a body part is represented by one or more of the specified test probes. Accessible parts of an equipment can include parts behind a door, panel, removable cover, etc. that can be opened without the use of a tool. Accessible parts do not include those that become accessible when floor standing equipment having a mass exceeding 40 kg is tilted. For equipment intended for building-in or rack-mounting, or for subassemblies and the like for incorporation in larger equipment,accessible parts do not include those that are not accessible when the equipment or subassembly is installed according to the method of mounting or installation specified in the installation instructions. A part is considered accessible if the instructions or markings intended to be followed require that a person phys...
Read more